Once you have all your drivers installed, radio menus configured and all your cabling properly connected, it's time to start the HRD software and setup the HRD Rig Connect interface.Ĭonfiguring the Rig Connect interface for HRD is quite simple and pretty much straight forward. If the transmitter keys when you start the HRD software, close HRD down, turn your radio off then back on to release the transmit key then restart HRD and uncheck the RTS option. For your initial setting, place a check mark in the "RTS" check box. Power", you will see check boxes for CTS, DTR and RTS. In the HRD Rig Connect screen, in the option box titled "Flow Control / Interface Menu#37 - CI-V 731: Default is Off: Leave Off Menu#36 - CI-V TRN: Default is On: Set to Off Menu#35 - CI-V Baud: Default is Auto: Set to 9600 Please review this entire section to ensure you are familiar with changing and saving new settings in the menus of your radio. The following menu items are found on page 54 of your IC-706 operator's manual. Solution home Knowledgebase Radio Support IC-706 MKIIG Configuration
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |